Up one chapter


view larger image

Begin OCR Text:
P 18OO l2 vo_vo _h _2_856_ Fig. 76. Fittíng the breaker c8msf8ft 1. Place the ResiteK plate on the distributor shaft _ and the fibre washers above this, s3e Fig. 74. Lubricate and place the centrifugal governor weighfs in position. Fit the locking springs. VoCW 2 Fit the b_eaker çamsha_ and p_açe on ehe _ _l_fl ' springs, see Fig. 76. 3. Lubricate the distribul_or shaft and place it in Fig. 7f. LUbr_C8tín0 Stheme for distribUtor _h d_ t _b e h _ _h k eh i eh _ _ e IS rl U Of OUStng. eC a e aKta (Lubrícant Bosch or eqUiv8lent) d. . h . . d _ a 3UStlng WaS erS are pOSltlOne COrreCty. 1. Grease the spring lightly Ft 1 v 4 2. Grease the bush and bearing pin Ft 1 v 22 3. Oil the breaker plate sliding surfaces Ol 1 v 22 4. Soak the lubricafing wick with oil Ol l v 2 5. Coat a thin layer of grease on the cam surface Ft l v 4 _ 6. Grease the end of the shaft Iightly and oil with _ Ft l v 8 and Ol l v 2 7. Grease the bearing pins and spring attachments Ft I v 8 8. Fill the oil cup while turning the shaft Ol l v 13 _ 9. Oil the washers and pin before fitting Ol l v 13 _ 1O. Soak the lubricating wick between the bushes with oil Ol l v 13 11. Lubric8te the shaft and fibre washers with gre8se and oil Ft l v 22 and OI l v 13 12. Oil the regulator plate Ol l v 22 13. Lightly coat the contact surfaces, flange pins etc. Ft l v B 14. Lubricate the bearing pin, ball, guide líp and con- tact surfaces with plenty of grease Ft 1 v 22 _ WCW 15. Apply a little grease to the rivet side of the lift- zl_s_ ing lip Ft l v 4 Fig. l7, Fitting the breaker plate 3-32
 
Not associated with Volvo AB Sweden or Volvo Cars of North America